{"id":8482,"date":"2022-05-10T10:14:17","date_gmt":"2022-05-10T08:14:17","guid":{"rendered":"http:\/\/www.chidiactools.com\/?post_type=product&p=8482"},"modified":"2022-05-10T10:41:33","modified_gmt":"2022-05-10T08:41:33","slug":"edge-bander-holz-her-lumina-1584-automatic-with-roller-bridge","status":"publish","type":"product","link":"https:\/\/www.chidiactools.com\/ar\/product\/edge-bander-holz-her-lumina-1584-automatic-with-roller-bridge\/","title":{"rendered":"Edge Bander – Holz Her Lumina 1584 Automatic with roller bridge"},"content":{"rendered":"

Base Machine<\/strong>
\nBase frame design for high rigidity, welded version
\nStabile pressure bridge with two rows of rubber coated pressure Surface hardened round steel guides for pressure bridge adjustment with direct drive.
\nWith motorized pressure beam adjustment
\nWith extraction duct for pre-milling unit, dia. 125 mm
\nCentral dust avacuation connection for post-machining units,
\n\u00d8 190 mm
\nIntegrated switch cabinet, easily accessible
\nIntegrated chip catch box on the end of the machine
\nPivoting and tilting control panel for ergonomic adjustment at eye height
\nWorkpiece support on rollers (690 mm extention \/ 1068 mm in total), can be clamped in any position for optimum workpiece support, with 3 adjustable feed
\nIntegrated stowage area for supply bottles for spraying unit and cleaning system
\nChain guide rail lubricated manually with grease nipple
\nPneumatic locking roller for minimum workpiece interval at machine entry
\nPressure bridge of high strength, rigid U-channels for smoth workpiece transport
\nLight barrier for sensing workpieces
\nLarge, space-saving and acoustically insulated guard hood with noise-absorbing safety cover over the post-processing area Heavy duty drive motor for jerk-free transport of workpieces with workpiece chain
\nTransport chain runs on precision half-round flat guides, chain pads on transport chain with high handle for perfect grip on workpieces <\/p>\n

TECHNICAL SPECIFICATIONS<\/strong>
\nLUMINA 1584 AUTOMATIC Edgebander for edging and post-processing of panel-type materials
\nEdging thickness, rolled edging: 0.4 \u2013 3 mm (depending on material)
\nEdging thickness, strip edging: 8 mm (Glu Jet) max. 15 mm with tool change on cutter unit
\nEdging height: max. 65 mm
\nWorkpiece thickness: 8 \u2013 60 mm
\nWorkpiece width: min. 60 mm
\nWorkpiece length: min. 140 mm
\nFeed rate: infinite 10 \u2013 20 m\/min. <\/p>\n

ELECTRICAL <\/strong>
\nElectrical for variable feed 400 V \/ 50 Hz, 2.2 kW <\/p>\n

OPERATION <\/strong>
\nEdge Control 19
\nwith 18,5\u2033 color touchscreen 16:9
\nPowerful controls and simpliest machine operation for efficient machine setup and re-setting.
\nRotatable and tiltable operating control at eye level with Windowslike user interface, all information is displayed in plain text and\/or graphics, with extensive program store.
\nExternal USB-interface
\nEco mod+
\nThis power-saving mode is an automatic stand-by mode, which puts all drives out of operation as soon as no workpiece is entered into the machine. The motors correspond to the new energy efficiency class IE2. If a workepiece is not entered into the machine over a longer time period (6 minutes) the heater of the glue application system automatically shuts down. No more energy is consumed by the machine. <\/p>\n

INFEED AREA <\/strong>
\nInfeed fence long (1492 mm) incl. support with integrated rollers
\nInfeed fence long for precise feeding of very long work pieces, easy adjustment to adjust the cutting depth during joining <\/p>\n

PRE-MILLING UNIT <\/strong>
\nPre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 min-1)
\nWith 2 trimming units for joining panel edges 1x operating in forward direction, 1x in rearward direction max. milling thickness: 3 mm, patented ProLock screw-in clamping system for rapid tool change
\nDiamond cutter \u00d8 70 x 64 x 30 mm, 2 teeth, left hand For pre-milling unit 1801 \/ 1802
\nDiamond cutter \u00d8 70 x 64 x 30 mm, 2 teeth, right hand For pre-milling unit 1801 \/ 1802 <\/p>\n

EDGE FEEDER <\/strong>
\nEdge feeder MG701 SYNCHRO
\nautomatic transport of roll and strip products max. load capacity: 150 mm
\nSynchronous drive with adjustable edge protrusion for cut length edging
\nfor coils: max. edge thickness 3 mm (material dependent) forward cut up to max. 65 mm (material dependent) max cross section 135 mm\u00b2 (material dependent) support table for coils \u00d8 820 mm <\/p>\n

LASER EDGE EXCHANGE UNIT <\/strong>
\nLaser Edge Unit Ltronic LT702
\nElectronical controlled unit for the activation of the functional layer on laser edges
\nIncluding laser edge library. The library includes the most common coextruded and coated laser edges which can be selected easily from the operator through the standard touchscreen.
\nIncl. change carriage
\nIncl. quick-change coupling device
\nIncl. HSK adapter for the aggregate
\nIncl. automatic aggregate recognition
\nIncl. water cooling system
\nIncl. electronic controlled air blower
\nIncl. voltage stabilizer
\n(for power grids without neutral conductor and for special grids a isolating transformer is necessary- on request)
\nPanel height with standard NIR Module = 8 \u2013 23 mm
\nEdge thickness max. 3 mm
\n6 kW max. load <\/p>\n

GLUE APPLICATION (EXCHANGE UNIT) <\/strong>
\nGlue application system Glu Jet GJ302 automatic
\n(2,3 kW, 50 Hz) motorical, automatic adjustment of gluing height (tracing nozzle)
\nGlu Jet hybrid technology
\nProcessing of EVA and PUR adhesives
\nAdhesive in cartridge or granules form
\nProcessing of neutral and coloured adhesives
\nGlue applied by means of nozzle technology
\nHeat-up time: 3 minutes
\nIncl. hopper for cartridges: 5 cartridges (approx. 2 kg)
\nIncl. hopper for glue granules: (approx. 2 kg)
\nIncl. automatic reloading of glue
\nIncl. automatic rinse function directly at the control panel through
\nseparate rinse channel
\nAutomatic glue temperature reduction according to time
\nEquipment for change unit:
\nIncl. change carriage
\nIncl. quick-change coupling device
\nIncl. HSK adapter for the aggregate
\nIncl. automatic aggregate recognition
\nGLU JET rinse hopper to collect glue residues during rinse procedure<\/p>\n

PRESSURE UNIT <\/strong>
\nPressure section 1914-MOT Motorical adjustment to the edge thickness directly from the control panel, with 4 sep. contact-controlled pressure rollers for clean edge pressing on carrier panel, first roller
\nautomatic driven synchronous to the feed speed, 3 support pressure roller <\/p>\n

END TRIMMING UNIT<\/strong>
\nEnd-trimming KA 701 pneumatic
\n(2 x 0.65 kW, 200 Hz, 12,000 min-1)
\nPneumatic pivoting feature 0\/10\u00b0 for coils and strips:
\nmax. edge thickness: 20mm (depending on material and feed speed), hardened and precision-ground linear guides each,
\nincl. 2 noise reduced TC-sawblades altern. teeth, \u00d8 110 mm, Z 20, incl. 2 extraction hoods <\/p>\n

MULTIFUNCTIONAL TRIMMING UNIT <\/strong>
\nFR701 Cutter unit
\n100% repetition accuracy at the touch of a button based on zeroclearance mechanisms and 6 fully digital NC servo-axes.
\nHeavy duty floor-mounted machine with shock-absorbing mounts and large sensing rollers for perfect results even at high feed rates.
\nMachine adjustments on linear guides with central lubrication. With standard blast nozzles in front of sensing rollers to blow away chips in front of sensing areas.
\nHorizontal sensing with angular sensing rollers with chemically applied nickel plating developed especially for processing modern, high gloss edging.
\nAirStream System Diamond cutter \u00d8 71,5 mm x 15,5 mm, \u00d8 16 mm Z = 2 18000 rpm R = 2,0 mm left hand For trimming unit FR701
\nAirStream System Diamond cutter \u00d8 71,5 mm x 15,5 mm, \u00d8 16 mm Z = 2 18000 rpm R = 2,0 mm right hand For trimming unit FR701 <\/p>\n

CORNER COPY UNIT <\/strong>
\nForm trimming unit FF701
\n100% repetition accuracy at the touch of a button based on zeroclearance mechanisms and 4 fully digital NC servo-axes.
\nIncludes two diamond tipped cutters with optimized chip removal. With automatic pendulum sensor for perfect copying results. Fully automatic pendulum sensor copies ends without material protrusion and leaves the optimum edge protrusion for the longitudinal edge for subsequent machining.
\nMachine adjustments on linear guides with central lubrication. With standard blast nozzles in front of sensing rollers to blow away chips in front of sensing areas.
\nIncluding shelf program for optimum processing of shelves with rounded edges.
\nDiamond coated cutter \u00d8 72,5 mm x 19 mm, \u00d8 20 mm, Z = 4 R = 2 mm, left hand with CM technology (LEUCO system) incl. integrated chip removal and patented ProLock tool connector for fast and precise tool changing for form trimming unit FF701 \/ 1833
\nDiamond coated cutter \u00d8 72,5 mm x 19 mm, \u00d8 20 mm, Z = 4 R = 2 mm, right hand with CM technology (LEUCO system) incl. integrated chip removal and patented ProLock tool connector for fast and precise tool changing for form trimming unit FF701 \/ 1833 <\/p>\n

SCRAPER UNIT <\/strong>
\nScraper unit ZK501
\nHeavy duty unit with large tracer rollers for perfect results at high speeds.
\nEquipped with single radius knife (standard R = 2 mm).
\n100% repeatable accuracy garanteed through backlash free mechanism and 5 full digital NC servo axis for infinitely fine adjustment.
\nThe unit can work independetly top and bottom, the entire unit can be excluded automatically.
\nInclusive of blow nozzles mounted in front of the tracer rollers to insure the removal of chips.
\nIncluded are specially nickel coated tracer rollers specifically developped for high gloss application.
\nHigh gloss package designed for the automatic compensation of high gloss protection foils.
\nTCT turnover knifes for scraper knife
\nR = 2,0 mm (2 pcs. required)<\/p>\n

SURFACE GLUE SCRAPER <\/strong>
\nSurface glue scraper 1964 scraping out superfluous glue for a clean glue line Plunge-in controlled top and bottom separately, incl. 2 blow nozzles, incl. 2 turnover knifes, incl. dust extraction hoods <\/p>\n

BUFFING <\/strong>
\nBuffing unit 1944K (2 x 0.2 kW, 400 V, 1,400 min-1) For edge cleaning and polishing, incl. plunge-in control, incl. 2 textile buffing wheels<\/p>\n<\/body>","protected":false},"excerpt":{"rendered":"

Base Machine Base frame design for high rigidity, welded version Stabile pressure bridge with two rows of rubber coated pressure Surface hardened round steel guides for pressure bridge adjustment with direct drive. With motorized pressure beam adjustment With extraction duct for pre-milling unit, dia. 125 mm Central dust avacuation connection for post-machining units, \u00d8 190 mm Integrated switch cabinet, easily accessible Integrated chip catch box on the end of the machine Pivoting and tilting control panel for ergonomic adjustment at…<\/p>","protected":false},"featured_media":8483,"comment_status":"open","ping_status":"closed","template":"","meta":{"nf_dc_page":""},"product_brand":[],"product_cat":[228,168,222],"product_tag":[],"class_list":{"0":"post-8482","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-featured","7":"product_cat-new-machines","8":"product_cat-edgebander","9":"post-has-thumbnail","11":"first","12":"instock","13":"featured","14":"shipping-taxable","15":"product-type-simple"},"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product\/8482","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/comments?post=8482"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/media\/8483"}],"wp:attachment":[{"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/media?parent=8482"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product_brand?post=8482"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product_cat?post=8482"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product_tag?post=8482"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}