{"id":8501,"date":"2022-05-10T10:56:48","date_gmt":"2022-05-10T08:56:48","guid":{"rendered":"http:\/\/www.chidiactools.com\/?post_type=product&p=8501"},"modified":"2022-05-10T10:58:09","modified_gmt":"2022-05-10T08:58:09","slug":"edge-baner-holz-her-streamer-1057xl","status":"publish","type":"product","link":"https:\/\/www.chidiactools.com\/ar\/product\/edge-baner-holz-her-streamer-1057xl\/","title":{"rendered":"Edge Bander – Holz Her Streamer 1057XL"},"content":{"rendered":"

BASIC MACHINE<\/strong>
\nBASIC MACHINE STREAMER 1057XL 200 \u2013 400 V \/ 50 Hz, with manual pressure bridge adjustment
\nRigid workpiece support XL type, distance 380 mm<\/p>\n

TECHNICAL SPECIFICATIONS<\/strong>
\nEdgebander for the edging and post-machining of materials in panel form
\nEdging thickness of coiled edging: 0,4 \u2013 3 mm
\n(depending on material)
\nEdging thickness of cut-length edging: 0,4 \u2013 6 mm
\n(depending on material)
\nEdging cross section: max. 6 x 42 mm
\nEdging height: max. 65 mm
\nPanel thickness: 8 \u2013 60 mm
\n(limitation possible in case of individual units)
\nWorkpiece width: min. 65 mm
\nWorkpiece length: min. 160 mm (without corner copying unit 1832) Workpiece length: min. 180 mm Feed speed: 10 m\/min. <\/p>\n

OPERATION <\/strong>
\nTurnable and tiltable control panel, ergonomically located on the inlet side with selector switches for adjusting the units with temperature control for the heating circuits in the adhesive application system <\/p>\n

PRE-MILLING UNIT<\/strong>
\nPre-milling unit FG201 with 2 cutter units for jointing the panel edge
\n1x counter clockwise run, 1x clockwise run manually adjustable run-in linear stop, with patented ProLock screw-in clamping system for rapid tool change with adjustable cutters
\nDiamond cutter \u00d8 70 x 48 x 30 mm, 2+2 teeth, left hand Air Stream System (HOLZ-HER \/ LEUCO patent) For pre-milling unit 1801 \/ 1802
\nDiamond cutter \u00d8 70 x 48 x 30 mm, 2+2 teeth, right hand Air Stream System (HOLZ-HER \/ LEUCO patent) For pre-milling unit 1801 \/ 1802 <\/p>\n

EDGE FEEDER <\/strong>
\n Edge feeder 1903
\nAutomatic transport of coils and single strips max. load capacity: 40 mm
\nmax. edge thickness 3 mm (material dependent) forward cut up to max. 65 mm (material dependent) max cross section 135 mm\u00b2 (material dependent) support table for coils \u00d8 820 mm <\/p>\n

GLUE APPLICATION<\/strong>
\nGlue application system Glu Jet GJ301 (2,3 kW, 50 Hz)
\nAutomatic adjustment of gluing height (tracing nozzle)
\nGlu Jet hybrid technology
\nProcessing of EVA and PUR adhesives
\nAdhesive in cartridge or granules form
\nProcessing of neutral and coloured adhesives
\nFor processing hot-melt adhesive in cartridge or granules form Glue applied by means of nozzle technology, heat-up time: 3 minutes
\nManual reloading of glue from the control panel
\nIncl. manual glue rinse function through separate rinse channel
\nMagazine capacity: 1 cartridge (approx. 330 g)
\nIncl. air pressure adjustment for the glue pressing cylinder
\nAutomatic glue temperature reduction according to time
\nHopper for 1,5 kg glue granulate
\nHopper for 1,4 kg glue cartridges (4 cartridges) <\/p>\n

PRESSURE UNIT <\/strong>
\nPressure unit 1912-3 pneumatic
\nfirst roller driven with plunge-in control, 2 conical support pressure rollers <\/p>\n

END TRIMMING UNIT <\/strong>
\nEnd trimming unit 1918 (60 mm) pneumatic
\nChamfer-type end trimming 0\/10 degrees, pneumatic adjustment incl. 2 alternating teeth carbide circular saw blades, \u00d8 110 mm, 20 teeth <\/p>\n

MULTIFUNCTIONAL TRIMMING UNIT <\/strong>
\nTrimming unit FR201 (2 x 0.6 kW, 300 Hz, 18,000 min-1)
\nMultipurpose unit for flush trimming, radius and chamfering
\nDiamond cutter \u00d8 57 x 17 mm Z = 2, R = 2,0 mm, left hand diamond coated, permanently equipped tool with CM technology (LEUCO), with integrated chip removal patented ProLock screw-in clamping system for rapid tool change for multifunctional trimming unit FR201
\nDiamond cutter \u00d8 57 x 17 mm Z = 2, R = 2,0 mm, right hand diamond coated, permanently equipped tool with CM technology (LEUCO), with integrated chip removal patented ProLock screw-in clamping system for rapid tool change for multifunctional trimming unit FR201 <\/p>\n

FORM TRIMMING<\/strong>
\nCorner rounding unit 1832 (1 x 0,22 kW, 300 Hz, 9000 min -1) corner copying function up to 3 mm edging thickness
\nworkpiece thickness: 12 \u2013 60 mm, incl. diamond tool R = 2 mm with CM technology, incl. automatic plunge-out control for edge thickness over 8 mm (max. feed speed 10 m\/min.)
\nDiamond coated tooling \u00d8 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm with CM technology (LEUCO system), with integrated chip removal, for corner rounding unit 1832 <\/p>\n

SCRAPER UNIT <\/strong>
\nScraper unit 1929 with 2 scraper carriers, incl. change-over plates R = 2,0 mm with 2 digital counters for horizontal sensing rollers and chip removers
\nWorkpiece thickness: min. 12 mm
\nChip collector for scraper unit 1929
\nSurface scraper unit 1964 (instead of Buffing unit 1940)
\nFor scraping off the glue residue to achieve a clean glued join Controlled at top and bottom, incl. 2 blowing nozzles, incl. 2 HM change-over blades
\nBuffing unit 1940 (2 x 0.09 kW, 50\/60 Hz, 1,400 min-1)
\nFor cleaning and edge polishing, with 2 textile discs, pivotable 0 \u2013 5\u00b0 <\/p>\n

SPRAYER UNIT <\/strong>
\nSprayer 1856 for the in- and outfeed area
\nFor the infeed area: Electronically controlled release agent sprayer with release agent
\nFor the outfeed area: Electronicaly controlled cleaning agent sprayer with cleaning agent<\/p>\n<\/body>","protected":false},"excerpt":{"rendered":"

BASIC MACHINE BASIC MACHINE STREAMER 1057XL 200 \u2013 400 V \/ 50 Hz, with manual pressure bridge adjustment Rigid workpiece support XL type, distance 380 mm TECHNICAL SPECIFICATIONS Edgebander for the edging and post-machining of materials in panel form Edging thickness of coiled edging: 0,4 \u2013 3 mm (depending on material) Edging thickness of cut-length edging: 0,4 \u2013 6 mm (depending on material) Edging cross section: max. 6 x 42 mm Edging height: max. 65 mm Panel thickness: 8 \u2013…<\/p>","protected":false},"featured_media":8502,"comment_status":"open","ping_status":"closed","template":"","meta":{"nf_dc_page":""},"product_brand":[],"product_cat":[228,168,222],"product_tag":[],"class_list":{"0":"post-8501","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-featured","7":"product_cat-new-machines","8":"product_cat-edgebander","9":"post-has-thumbnail","11":"first","12":"instock","13":"featured","14":"shipping-taxable","15":"product-type-simple"},"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product\/8501","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/comments?post=8501"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/media\/8502"}],"wp:attachment":[{"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/media?parent=8501"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product_brand?post=8501"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product_cat?post=8501"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.chidiactools.com\/ar\/wp-json\/wp\/v2\/product_tag?post=8501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}